4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2024)

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (1)

  • Save

Midea dishwashers are known for their ultimate performance and ease of use. Although durable, they require regular maintenance for smooth functioning. If neglected, their component(s) may malfunction.

For your convenience, most Midea dishwashers come with a delicate light that blinks to alert you when some component goes bad. However, many users have reported that this delicate light sometimes keeps blinking.

This is among the common issues that many people face while using the Midea dishwashers. If you have come across this problem, this article is for you.

We have put together a list of the most common reasons why the delicate light on your Midea dishwasher may keep blinking. Let’s dig deeper without any further delay.

Some common reasons and solutions for the delicate light flashing problem in the Midea dishwasher are mentioned in the section below.

  1. Restart

Oddly enough, this problem can actually be fixed by restarting in some cases. Although it is not an effective solution, many users have stated that the delicate light stopped blinking after they restarted the Midea dishwashers. So, it would be a good idea to restart the unit if you face this problem.

To restart your Midea dishwashers, simply unplug the power cord and put it back in after a few minutes. If restarting doesn’t fix the problem, try resetting your Midea dishwasher. This way, you will flush out any error that is causing the delicate light to flash.

The reset process is also fairly straightforward. All you need to do is press and hold the “auto” and “normal” buttons simultaneously for a few seconds, and that’s pretty much it. If some bug was causing this problem, it would be fixed by now.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2)

  • Save

However, if the delicate light is still blinking, the problem could be a bit deeper and require additional troubleshooting.

  1. Loose Door Latch

A loose door latch is a leading reason for this problem in the Midea dishwashers. A door latch is a mechanical fastener that keeps the door of the dishwasher closed. This way, it prevents the water in the unit from spilling out into your home.

If it goes loose, it won’t be able to keep the door shut, and as a result, your Midea dishwasher may not perform its wash cycle. Furthermore, modern door latches work with safety sensors. So, the unit may stop working if the sensors detect a failing door latch.

This will render your Midea dishwasher useless. So, you need to repair the door latch immediately to ensure the proper working of your dishwasher.

  • Inspecting the Door Latch

Take a close look at the door latch and make sure it is clean. Over time, dust particles and debris may get stuck inside the door latch, hindering its normal functioning. If that’s the case, clean it out using a small tool and see if it has fixed the problem or not.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (3)

  • Save

Before inspecting or repairing the door latch, make sure to disconnect the power first. Unplug the unit, even if it is not working. This will ensure your safety while working. Moreover, do not forget to turn off the water supply to your Midea dishwasher.

  • Lubrication

Like most fasteners, door latches also require proper lubrication to work properly. If you haven’t lubricated it for a long time, it will increase the friction between the components and may restrict their movement.

If that’s the case, get a quality lubricant, such as a nut loosener, and squirt a few drops on the door latch. It will resolve the issue, and the door latch of your Midea dishwasher will be up and running again. To extend the lifespan of your door latch, consider lubricating it now and then.

  • Failing Components

Check the strike plate, door switch, hinge, and gasket for any signs of damage. The strike plate is the component that your door latch inserts into when closing. If some component has failed, it will keep the door latch from latching properly, thus causing the delicate light to blink.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (4)

  • Save

Furthermore, make sure that the plate is not misaligned. If it is, make necessary adjustments to bring it back to its location. In some models, the handle is connected to the door latch and is a part of the latching mechanism.

In those models, the latch releases when you lift the handle, allowing you to open and close the door. If the door handle is damaged, it can also lead to this problem. So, take a look at the door handle of your Midea dishwasher and make sure it is in good health.

If the problem is not with the handle, the door latch actuator could be the culprit. It is the component that connects the handle to the latch. So, if it has gone bad, consider replacing it. Once it has been replaced, the door of your Midea dishwasher will close properly, and the delicate light will stop blinking.

All these components are readily available all over the world. Head to your nearby store, and you may find a replacement there.

  1. Clogged Drain Hose

A blocked drain hose is another probable cause of this problem in the Midea dishwasher. Like all dishwashers, the Midea dishwasher also uses a drain hose to carry the wastewater out of the unit.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (5)

  • Save

Since it carries off wastewater, food particles can accumulate in this hose over time and block it. When the drain hose gets clogged, water won’t go out of it properly, and the delicate light may start flashing.Begin by checking the drain hose.

Although its location may vary depending on the model, it is usually located on the back of the machine. If you are unsure of its location, consider reading the user manual of your Midea dishwasher.

It will likely have information about the location of all the components, including the drain hose. If the drain hose is clogged, you will have to clean it to resolve the issue. So, reach out to a plumber and ask them to clean it.

  1. Improper Temperature

The Midea dishwasher needs hot water to properly dissolve the detergent. If the temperature of the water is not hot enough, the dishwasher won’t be able to fully wash the dishes, and the delicate light will blink to alert you.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (6)

  • Save

Therefore, check the water temperature and make sure it is suitable for your Midea dishwasher.

The Bottom Line

Midea dishwashers are a go-to choice for many homeowners, thanks to their exciting features and durability. They feature delicate lights that blink to get your attention when something goes wrong. If the light on your model starts blinking, several problems could be at play.

If restarting or resetting the unit doesn’t fix the problem, check its door latch and drain hose and make sure that they are in good working condition.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (7)

  • Save

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2024)
Top Articles
Latest Posts
Article information

Author: Lidia Grady

Last Updated:

Views: 6035

Rating: 4.4 / 5 (45 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Lidia Grady

Birthday: 1992-01-22

Address: Suite 493 356 Dale Fall, New Wanda, RI 52485

Phone: +29914464387516

Job: Customer Engineer

Hobby: Cryptography, Writing, Dowsing, Stand-up comedy, Calligraphy, Web surfing, Ghost hunting

Introduction: My name is Lidia Grady, I am a thankful, fine, glamorous, lucky, lively, pleasant, shiny person who loves writing and wants to share my knowledge and understanding with you.