4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2024)

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (1)

  • Save

Midea dishwashers are known for their ultimate performance and ease of use. Although durable, they require regular maintenance for smooth functioning. If neglected, their component(s) may malfunction.

For your convenience, most Midea dishwashers come with a delicate light that blinks to alert you when some component goes bad. However, many users have reported that this delicate light sometimes keeps blinking.

This is among the common issues that many people face while using the Midea dishwashers. If you have come across this problem, this article is for you.

We have put together a list of the most common reasons why the delicate light on your Midea dishwasher may keep blinking. Let’s dig deeper without any further delay.

Some common reasons and solutions for the delicate light flashing problem in the Midea dishwasher are mentioned in the section below.

  1. Restart

Oddly enough, this problem can actually be fixed by restarting in some cases. Although it is not an effective solution, many users have stated that the delicate light stopped blinking after they restarted the Midea dishwashers. So, it would be a good idea to restart the unit if you face this problem.

To restart your Midea dishwashers, simply unplug the power cord and put it back in after a few minutes. If restarting doesn’t fix the problem, try resetting your Midea dishwasher. This way, you will flush out any error that is causing the delicate light to flash.

The reset process is also fairly straightforward. All you need to do is press and hold the “auto” and “normal” buttons simultaneously for a few seconds, and that’s pretty much it. If some bug was causing this problem, it would be fixed by now.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2)

  • Save

However, if the delicate light is still blinking, the problem could be a bit deeper and require additional troubleshooting.

  1. Loose Door Latch

A loose door latch is a leading reason for this problem in the Midea dishwashers. A door latch is a mechanical fastener that keeps the door of the dishwasher closed. This way, it prevents the water in the unit from spilling out into your home.

If it goes loose, it won’t be able to keep the door shut, and as a result, your Midea dishwasher may not perform its wash cycle. Furthermore, modern door latches work with safety sensors. So, the unit may stop working if the sensors detect a failing door latch.

This will render your Midea dishwasher useless. So, you need to repair the door latch immediately to ensure the proper working of your dishwasher.

  • Inspecting the Door Latch

Take a close look at the door latch and make sure it is clean. Over time, dust particles and debris may get stuck inside the door latch, hindering its normal functioning. If that’s the case, clean it out using a small tool and see if it has fixed the problem or not.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (3)

  • Save

Before inspecting or repairing the door latch, make sure to disconnect the power first. Unplug the unit, even if it is not working. This will ensure your safety while working. Moreover, do not forget to turn off the water supply to your Midea dishwasher.

  • Lubrication

Like most fasteners, door latches also require proper lubrication to work properly. If you haven’t lubricated it for a long time, it will increase the friction between the components and may restrict their movement.

If that’s the case, get a quality lubricant, such as a nut loosener, and squirt a few drops on the door latch. It will resolve the issue, and the door latch of your Midea dishwasher will be up and running again. To extend the lifespan of your door latch, consider lubricating it now and then.

  • Failing Components

Check the strike plate, door switch, hinge, and gasket for any signs of damage. The strike plate is the component that your door latch inserts into when closing. If some component has failed, it will keep the door latch from latching properly, thus causing the delicate light to blink.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (4)

  • Save

Furthermore, make sure that the plate is not misaligned. If it is, make necessary adjustments to bring it back to its location. In some models, the handle is connected to the door latch and is a part of the latching mechanism.

In those models, the latch releases when you lift the handle, allowing you to open and close the door. If the door handle is damaged, it can also lead to this problem. So, take a look at the door handle of your Midea dishwasher and make sure it is in good health.

If the problem is not with the handle, the door latch actuator could be the culprit. It is the component that connects the handle to the latch. So, if it has gone bad, consider replacing it. Once it has been replaced, the door of your Midea dishwasher will close properly, and the delicate light will stop blinking.

All these components are readily available all over the world. Head to your nearby store, and you may find a replacement there.

  1. Clogged Drain Hose

A blocked drain hose is another probable cause of this problem in the Midea dishwasher. Like all dishwashers, the Midea dishwasher also uses a drain hose to carry the wastewater out of the unit.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (5)

  • Save

Since it carries off wastewater, food particles can accumulate in this hose over time and block it. When the drain hose gets clogged, water won’t go out of it properly, and the delicate light may start flashing.Begin by checking the drain hose.

Although its location may vary depending on the model, it is usually located on the back of the machine. If you are unsure of its location, consider reading the user manual of your Midea dishwasher.

It will likely have information about the location of all the components, including the drain hose. If the drain hose is clogged, you will have to clean it to resolve the issue. So, reach out to a plumber and ask them to clean it.

  1. Improper Temperature

The Midea dishwasher needs hot water to properly dissolve the detergent. If the temperature of the water is not hot enough, the dishwasher won’t be able to fully wash the dishes, and the delicate light will blink to alert you.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (6)

  • Save

Therefore, check the water temperature and make sure it is suitable for your Midea dishwasher.

The Bottom Line

Midea dishwashers are a go-to choice for many homeowners, thanks to their exciting features and durability. They feature delicate lights that blink to get your attention when something goes wrong. If the light on your model starts blinking, several problems could be at play.

If restarting or resetting the unit doesn’t fix the problem, check its door latch and drain hose and make sure that they are in good working condition.

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (7)

  • Save

4 Solutions For Midea Dishwasher Delicate Light Blinking - Miss Vickie (2024)

FAQs

Why is my dishwasher flashing delicate? ›

One possibility is that the delicate cycle is currently in progress, and the light is flashing to indicate that it is still running. In this case, you should wait for the cycle to finish before attempting to reset the dishwasher.

Why is my dishwasher light blinking but not starting? ›

Try pressing the "Start/Reset" pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the appliance at the house circuit breaker or fuse box for 30 seconds. Restore power and the dishwasher should reset and function normally.

How do you force a dishwasher to reset? ›

How to reset a dishwasher control panel
  1. First press the “Cancel/Resume” button, which won't be illuminated, then unplug the appliance from the outlet. ...
  2. Wait approximately 1 minute, plug the cord back into the AC outlet or flip the breaker back on.
  3. Start a new cycle and check if the dishwasher is working properly.

What does delicate mean on a dishwasher? ›

This wash cycle provides a gentle wash for delicate items. China is normally safe to wash in your automatic dishwasher.

What is error 4 on Midea dishwasher? ›

E4 indicates a water outlet temperature sensor error. E5 indicates an air side heat exchanger refrigerant outlet temperature sensor error. E7 indicates an outdoor ambient temperature sensor error. 1Eb indicates a water side heat exchanger anti-freezing temperature sensor 1 error.

How do you reset a dishwasher error? ›

Some models require you to shut off the power to the dishwasher either by unplugging it or shutting off the circuit breaker. Others are reset by pressing and holding the Start/Reset button on the control panel, then waiting a few moments before attempting to start a wash cycle.

Why is my dishwasher not starting but lights come on? ›

There are a few reasons your dishwasher might not start, but the most likely culprits include the door latch assembly, electric control timer, switch selection, and heat fuse. You will want to consult your owners manual to find manufacturer instructions on how to reset a dishwasher that has power but is not turning on.

Why is the control lock light flashing on my dishwasher? ›

If the Control Lock feature has been enabled, the Control Lock light will flash three times, indicating that it is activated. Press the button for that dedicated key to activate and deactivate the Control Lock.

How do you diagnose a dishwasher problem? ›

Examine the spray arms, inlet filter screens and the drain for damage and blockages. The inlet valve may need to be tested as well. Inspect the dishwasher motor and mounts. You should also check the fan motor and blades for damage.

Why is the start Resume light blinking on my dishwasher? ›

The Start/Resume light flashing, (Select models), indicates the cycle or start-up was interrupted. This can happen if the door is opened during the cycle or power has been interrupted. Push the door firmly closed within 3 seconds of pressing Start/Resume.

Why does my Samsung dishwasher keep going to delicate cycle? ›

The delicate light flashing is a no drain error with your machine. Does the dishwasher drain normally? Please check the drain hose and see if it is either kinked or blocked. if it is please clean or clear it out then try it again.

Why is my dishwasher not going through the wash cycle? ›

Lack of Water Supply

Your dishwasher needs a healthy supply of water to operate correctly. It gets this water through the water inlet valve; if the valve is defective, damaged, or broken, it will disrupt your dishwasher's cycle. Check your home's water pressure to ensure it is normal.

Top Articles
Latest Posts
Article information

Author: Rev. Porsche Oberbrunner

Last Updated:

Views: 6011

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Rev. Porsche Oberbrunner

Birthday: 1994-06-25

Address: Suite 153 582 Lubowitz Walks, Port Alfredoborough, IN 72879-2838

Phone: +128413562823324

Job: IT Strategist

Hobby: Video gaming, Basketball, Web surfing, Book restoration, Jogging, Shooting, Fishing

Introduction: My name is Rev. Porsche Oberbrunner, I am a zany, graceful, talented, witty, determined, shiny, enchanting person who loves writing and wants to share my knowledge and understanding with you.