Diy whirlpool fridge light change: a quick and budget-friendly solution - MyHomeNiche (2024)

What To Know

• If there is a plastic cover or diffuser over the light bulb, gently pry it off with your fingers or a screwdriver.
• Replacing the light bulb in your Whirlpool refrigerator is a simple task that can be completed in just a few minutes.
• The lifespan of a refrigerator light bulb varies depending on the type of bulb and how often the refrigerator is used.

A well-lit refrigerator is essential for finding your food and drinks quickly and easily. If the light in your Whirlpool refrigerator has burned out, don’t worry – it’s a relatively simple task to replace it yourself. In this comprehensive guide, we’ll walk you through the step-by-step process of how to change whirlpool refrigerator light.

Before you begin, gather the following tools and materials:

• Replacement refrigerator light bulb (check your refrigerator’s manual for the correct wattage and type)
• Screwdriver (if necessary)

Safety Precautions

Before working on your refrigerator, unplug it from the power outlet. This will prevent any risk of electrical shock.

Step-by-Step Instructions

1. Locate the Light Bulb

The light bulb in most Whirlpool refrigerators is located under the ceiling of the refrigerator compartment. It may be behind a plastic cover or diffuser.

2. Remove the Cover or Diffuser

If there is a plastic cover or diffuser over the light bulb, gently pry it off with your fingers or a screwdriver.

3. Unscrew the Old Bulb

Locate the old light bulb and gently unscrew it counterclockwise. Do not use excessive force, as you may damage the socket.

4. Replace with New Bulb

Take the new light bulb and screw it into the socket clockwise until it is snug. Avoid overtightening.

5. Reattach Cover or Diffuser

If you removed a cover or diffuser, snap it back into place over the light bulb.

6. Plug in Refrigerator

Once the light bulb is replaced, plug the refrigerator back into the power outlet.

7. Test the Light

Open the refrigerator door and check if the light is working properly. If it is not, double-check that the bulb is properly installed and that the power is turned on.

Additional Tips

• If you have a newer Whirlpool refrigerator with an LED light, it may not be replaceable. Contact Whirlpool for assistance.
• If the light continues to burn out frequently, there may be an underlying electrical issue. Contact a qualified appliance repair technician.
• Use a flashlight to help you see inside the refrigerator when replacing the light bulb.

Takeaways

Replacing the light bulb in your Whirlpool refrigerator is a simple task that can be completed in just a few minutes. By following these step-by-step instructions, you can ensure that your refrigerator is well-lit and your food and drinks are easy to find.

Basics You Wanted To Know

Q: Can I use any type of light bulb in my Whirlpool refrigerator?
A: No, you should use the type of light bulb specified in your refrigerator’s manual. Using the wrong type of bulb could damage the refrigerator or create a fire hazard.

Q: How often should I replace the light bulb in my Whirlpool refrigerator?
A: The lifespan of a refrigerator light bulb varies depending on the type of bulb and how often the refrigerator is used. In general, you should replace the bulb every 6-12 months.

Q: My refrigerator light is flickering. What should I do?
A: A flickering light bulb could indicate a loose connection or a failing bulb. Try tightening the bulb and if that doesn’t solve the problem, replace the bulb with a new one. If the flickering persists, contact a qualified appliance repair technician.

Tags

whirlpool refrigerator